Article View: sci.materials
Article #193Re: 2 plastics questions
From: John E. Brennan
Date: Fri, 04 Sep 1992 13:14
Date: Fri, 04 Sep 1992 13:14
34 lines
1621 bytes
1621 bytes
In article <1992Aug31.204952.29444@serval.net.wsu.edu> bill@wsuaix.csc.wsu.edu (William E. Johns;S23015) writes:
>In article <a750288.16@pan.mc.ti.com> a750288@pan.mc.ti.com (John E. Brennan) writes:
>>I'm hoping somebody can give me some help with these questions.
>>
>>1. What adhesives can bond high density polyethylene to rigid PVC or
>> HDPE to itself? The bonds would be used in outdoor applications.
>I would guess that your best luck would be in bonding HDPE to PVC or itself
>would be with HDPE itself. Use it as a hot melt.
THANKS A BUNCH FOR THIS!! We've made up a few samples using a hot melt and
they're doing great.
>>2. What plastics would be resistant to soaking in hot transmission fluid?
>I just gotto believe there are lots and lots. How hot? Nylons, delrin,
>PTFE, what's the application?
>>
The application is a casing for an electrical part inside a transmission.
Temperature would be 250 F or above.
Take Care,
John
----------------------------------------------------------------------------
John Brennan
a750288@pan.mc.ti.com
Technical Details
Message-ID:
<a750288.19@pan.mc.ti.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!csc.ti.com!tilde.csc.ti.com!pan.mc.ti.com!a750288References:
<a750288.16@pan.mc.ti.com> <1992Aug31.204952.29444@serval.net.wsu.edu>Show Full Headers
Complete Article Headers
Newsgroups: sci.materials Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!csc.ti.com!tilde.csc.ti.com!pan.mc.ti.com!a750288 From: a750288@pan.mc.ti.com (John E. Brennan) Subject: Re: 2 plastics questions Message-ID: <a750288.19@pan.mc.ti.com> Sender: usenet@pan.mc.ti.com (USENET News System) Organization: Texas Instruments Materials and Controls Group References: <a750288.16@pan.mc.ti.com> <1992Aug31.204952.29444@serval.net.wsu.edu> Date: Fri, 4 Sep 1992 13:14:32 GMT Lines: 34