Article View: sci.materials
Article #369Re: SEM of lithium?
From: Alan Wilson
Date: Mon, 04 Jan 1993 16:14
Date: Mon, 04 Jan 1993 16:14
13 lines
1155 bytes
1155 bytes
In article <BznzK5.JFH@creare.com>, kwg@creare.com (Kent Goeking) writes: > > > I would like to hear if anyone has any experience in preparing moisture > sensitive samples for SEM examination. In particular I would like to > examine the interface between a piece of lithium... I have looked at Li metal in a SEM by scraping the surface while the sample is just out of the air lock and then quickly inserting it - probably not for you. I have also thought of preparing the sample under dry nitrogen and transferring under nitrogen into the SEM. Alan Wilson, mt_wilson@fencer.dsto.gov.au
Technical Details
Message-ID:
<1993Jan4.101403.165435@dstos3.dsto.gov.au>Path:
arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!wupost!sdd.hp.com!think.com!ames!network.ucsd.edu!munnari.oz.au!yoyo.aarnet.edu.au!news.adelaide.edu.au!dstos3.dsto.gov.au!mt_wilson@fencer.dsto.gov.auReferences:
<BznzK5.JFH@creare.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!wupost!sdd.hp.com!think.com!ames!network.ucsd.edu!munnari.oz.au!yoyo.aarnet.edu.au!news.adelaide.edu.au!dstos3.dsto.gov.au!mt_wilson@fencer.dsto.gov.au Newsgroups: sci.materials,sci.chem Subject: Re: SEM of lithium? Message-ID: <1993Jan4.101403.165435@dstos3.dsto.gov.au> From: mt_wilson@fencer.dsto.gov.au (Alan Wilson) Date: 4 Jan 93 10:14:01 CST References: <BznzK5.JFH@creare.com> Organization: DSTO, ARL, Australia Nntp-Posting-Host: alanw.aed.dsto.gov.au Lines: 15