Thread View: sco.opendesktop
3 messages
3 total messages
Started by Marcos A. Pendas
Mon, 04 Jun 1990 18:11
Western Digital network adapter
Author: Marcos A. Pendas
Date: Mon, 04 Jun 1990 18:11
Date: Mon, 04 Jun 1990 18:11
7 lines
524 bytes
524 bytes
Does anyone know if a Western Digital EtherCard PLUS 10 Base T will work with ODT. Thanks in advance. Marcos Pendas uunet!mabjab!map
Re: Western Digital network adapter
Author: dionj Dion L. Johnson
Date: Wed, 06 Jun 1990 00:51
Date: Wed, 06 Jun 1990 00:51
11 lines
734 bytes
734 bytes
In article <1990Jun4.181144.734@mabjab> map@mabjab.uucp (Marcos A. Pendas) writes: > >Does anyone know if a Western Digital EtherCard PLUS 10 Base T >will work with ODT. > >Thanks in advance. >Marcos Pendas >uunet!mabjab!map It's not supported by SCO, but it should work.
Re: Western Digital network adapter
Author: Brad Templeton
Date: Mon, 11 Jun 1990 06:43
Date: Mon, 11 Jun 1990 06:43
11 lines
955 bytes
955 bytes
What are the compatability groups for these ethernet adaptors? The ones supported by SCO, such as the 8003, do seem to be less common. Why is that? It seems that the general Novell style adapters are the most common, for obvious reasons. Is it the case that many are actually compatible, just not on the officially supported list? Are the 3Com type any faster or slower than the WD type? -- Brad Templeton, ClariNet Communications Corp. -- Waterloo, Ontario 519/884-7473
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads