Overclock using 83MHz?

Thread View: sg.comp.hardware.ibmpc

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Gary Gooi Tue, 08 Dec 1998 00:00

Author: Gary Gooi
Date: Tue, 08 Dec 1998 00:00

14 lines
1480 bytes

Hi
I just bought an Aopen AX6B motherboard and a Celeron 300A. Tried to
overclock to 450MHZ but not stable. I am thinking of using the 83MHz Bus
speed instead.
Did anyone know what will be the resulting AGP and PCI speed if I
were to use the 83MHz bus instead? Because I would like to know if
the AGP or PCI ratio will be hazardous to some cards.

Pls advice.

(pls carbon copy to my email when u reply to this post)
Thank you in advance.

joe

Re: Overclock using 83MHz?

Author: bencts
Date: Tue, 08 Dec 1998 00:00

24 lines
1816 bytes

if set to 2/3 of 100mhz fsb then agp=67mhz, pci=33mhz (normal)
if set to 2/3 83mhz fsb then agp=55mhz, pci=28mhz (underutilized)
if set to full 100mhz fsb then agp=100mhz, pci=50mhz (crazy! suicide!)
if set to full 83 mhz fsb then agp=83mhz, pci=42mhz (not advisable)


Gary Gooi <goois@mbox5.singnet.com.sg> wrote in article
<366D0459.DCBF972A@mbox5.singnet.com.sg>...
> Hi
> I just bought an Aopen AX6B motherboard and a Celeron 300A. Tried to
> overclock to 450MHZ but not stable. I am thinking of using the 83MHz Bus
> speed instead.
> Did anyone know what will be the resulting AGP and PCI speed if I
> were to use the 83MHz bus instead? Because I would like to know if
> the AGP or PCI ratio will be hazardous to some cards.
> 
> Pls advice.
> 
> (pls carbon copy to my email when u reply to this post)
> Thank you in advance.
> 
> joe
> 
>

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads