🚀 go-pugleaf

Son dos cosas:

El ultimo XFree soporta la Sis, bajalo
despues si se ve mal
agrega esto a la parte de la tarjeta sis svga dell XF86Setup:
option "NOBIT_BLT"
option "NOIMAGE_BLT"

No me acuerdo si estan bien escritas lals opciones pero el faq de la sis
pall Xfree esta en xfree86.org en la documentacion, hay un faq especial
para laas Sis.

Saludos 
Duncan

Sebastian Fernando Rodriguez Bustamante (sebrodri@anakena.dcc.uchile.cl) wrote:

> Hola.

> Tengo un problema instalando Linux RedHat 5.1 con mi tarjeta de
> video PCI Sis 6326 de 8 MB RAM.
> EL problema es que al correr X-Windows el monitor se ve todo con
> rayas.
> Si alguien pudiera ayudarme o tuviera una experiencia exitosa
> con similar equipo (o intuya cual es el problema :) ) se lo 
> agradeceria mucho.
> Adjunto va el archivo XF86Config.


> ============================== XF86Config ========================== 

> # File generated by XConfigurator.

> # **********************************************************************
> # Refer to the XF86Config(4/5) man page for details about the format of 
> # this file.
> # **********************************************************************

> # **********************************************************************
> # Files section.  This allows default font and rgb paths to be set
> # **********************************************************************

> Section "Files"

> # The location of the RGB database.  Note, this is the name of the
> # file minus the extension (like ".txt" or ".db").  There is normally
> # no need to change the default.

>     RgbPath	"/usr/X11R6/lib/X11/rgb"

> # Multiple FontPath entries are allowed (they are concatenated together)

>     FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"

> EndSection

> # **********************************************************************
> # Server flags section.
> # **********************************************************************

> Section "ServerFlags"

>     # Uncomment this to cause a core dump at the spot where a signal is 
>     # received.  This may leave the console in an unusable state, but may
>     # provide a better stack trace in the core dump to aid in debugging
>     #NoTrapSignals

>     # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
>     # This allows clients to receive this key event.
>     #DontZap

>     # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
>     # sequences.  This allows clients to receive these key events.
>     #DontZoom

> EndSection

> # **********************************************************************
> # Input devices
> # **********************************************************************

> # **********************************************************************
> # Keyboard section
> # **********************************************************************

> Section "Keyboard"

>     Protocol    "Standard"

>     # when using XQUEUE, comment out the above line, and uncomment the
>     # following line
>     #Protocol   "Xqueue"

>     AutoRepeat  500 5

>     # Let the server do the NumLock processing.  This should only be 
>     # required when using pre-R6 clients
>     #ServerNumLock

>     # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>     #Xleds      1 2 3

>     #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
>     #RightCtl key to Compose, and ScrollLock key to ModeLock:

>     LeftAlt        Meta
>     RightAlt        Meta
>    ScrollLock      Compose
>    RightCtl        Control

> # To disable the XKEYBOARD extension, uncomment XkbDisable.

> #    XkbDisable

> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults).  For example, for a non-U.S.
> # keyboard, you will probably want to use:
> #    XkbModel    "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> #    XkbModel    "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> #    XkbLayout   "de"
> # or:
> #    XkbLayout   "de"
> #    XkbVariant  "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> #    XkbOptions  "ctrl:swapcaps"

> # These are the default XKB settings for XFree86
> #    XkbRules    "xfree86"
> #    XkbModel    "pc101"
> #    XkbLayout   "us"
> #    XkbVariant  ""
> #    XkbOptions  ""

>    XkbKeycodes     "xfree86"
>    XkbTypes        "default"
>    XkbCompat       "default"
>    XkbSymbols      "us(pc101)"
>    XkbGeometry     "pc"
>    XkbRules        "xfree86"
>    XkbModel        "pc101"
>     XkbLayout       "es"
> EndSection

> # **********************************************************************
> # Pointer section
> # **********************************************************************

> Section "Pointer"
>     Protocol    "Mousesystems"
>     Device      "/dev/ttyS0"

> # When using XQUEUE, comment out the above two lines, and uncomment
> # the following line.

> #    Protocol	"Xqueue"

> # Baudrate and SampleRate are only for some Logitech mice

> #    BaudRate	9600
> #    SampleRate	150

> # Emulate3Buttons is an option for 2-button Microsoft mice
> # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

> #    Emulate3Buttons
> #    Emulate3Timeout    50

> # ChordMiddle is an option for some 3-button Logitech mice

> #    ChordMiddle

> EndSection


> # **********************************************************************
> # Monitor section
> # **********************************************************************

> # Any number of monitor sections may be present

> Section "Monitor"

>     Identifier  "My Monitor"
>     VendorName  "Unknown"
>     ModelName   "Unknown"

> # HorizSync is in kHz unless units are specified.
> # HorizSync may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.

>     HorizSync   28 - 55

> # VertRefresh is in Hz unless units are specified.
> # VertRefresh may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.

>     VertRefresh 50-120

> # Modes can be specified in two formats.  A compact one-line format, or
> # a multi-line format.


> # These two are equivalent

> #    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

> #    Mode "1024x768i"
> #        DotClock	45
> #        HTimings	1024 1048 1208 1264
> #        VTimings	768 776 784 817
> #        Flags		"Interlace"
> #    EndMode

> # This is a set of standard mode timings. Modes that are out of monitor spec
> # are automatically deleted by the server (provided the HorizSync and
> # VertRefresh lines are correct), so there's no immediate need to
> # delete mode timings (unless particular mode timings don't work on your
> # monitor). With these modes, the best standard mode that your monitor
> # and video card can support for a given resolution is automatically
> # used.

> # 640x400 @ 70 Hz, 31.5 kHz hsync
> Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
> # 640x480 @ 60 Hz, 31.5 kHz hsync
> Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
> # 800x600 @ 56 Hz, 35.15 kHz hsync
> ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
> # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
> #Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace

> # 640x480 @ 72 Hz, 36.5 kHz hsync
> Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
> # 800x600 @ 60 Hz, 37.8 kHz hsync
> Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync

> # 800x600 @ 72 Hz, 48.0 kHz hsync
> Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
> # 1024x768 @ 60 Hz, 48.4 kHz hsync
> Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync

> # 1024x768 @ 70 Hz, 56.5 kHz hsync
> Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
> # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
> #Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace

> # 1024x768 @ 76 Hz, 62.5 kHz hsync
> Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
> # 1280x1024 @ 61 Hz, 64.2 kHz hsync
> Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054

> # 1280x1024 @ 74 Hz, 78.85 kHz hsync
> Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064

> # 1280x1024 @ 76 Hz, 81.13 kHz hsync
> Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064

> # Low-res Doublescan modes
> # If your chipset does not support doublescan, you get a 'squashed'
> # resolution like 320x400.

> # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
> Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
> # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
> Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
> # 320x240 @ 72 Hz, 36.5 kHz hsync
> Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
> # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
> ModeLine "400x300"     18     400  416  448  512   300  301  602  312 Doublescan
> # 400x300 @ 60 Hz, 37.8 kHz hsync
> Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
> # 400x300 @ 72 Hz, 48.0 kHz hsync
> Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
> # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
> ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
> # 480x300 @ 60 Hz, 37.8 kHz hsync
> Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
> # 480x300 @ 63 Hz, 39.6 kHz hsync
> Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
> # 480x300 @ 72 Hz, 48.0 kHz hsync
> Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan

> EndSection


> # **********************************************************************
> # Graphics device section
> # **********************************************************************

> # Any number of graphics device sections may be present

> Section "Device"
>     Identifier        "Generic VGA"
>     VendorName        "Unknown"
>     BoardName "Unknown"
>     Chipset   "generic"

> #    VideoRam 256

> #    Clocks   25.2 28.3

> EndSection

> # Device configured by Xconfigurator:

> Section "Device"
>     Identifier  "My Video Card"
>     VendorName  "Unknown"
>     BoardName   "Unknown"
>     VideoRam    8192
>     # Insert Clocks lines here if appropriate
> EndSection


> # **********************************************************************
> # Screen sections
> # **********************************************************************

> # The Colour SVGA server

> Section "Screen"
>     Driver      "svga"
>     # Use Device "Generic VGA" for Standard VGA 320x200x256
>     #Device      "Generic VGA"
>     Device      "My Video Card"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Depth       8
>         # Omit the Modes line for the "Generic VGA" device
>         Modes       "800x600"
>         ViewPort    0 0
>         # Use Virtual 320 200 for Generic VGA
>         Virtual     800 600
>     EndSubsection
>     Subsection "Display"
>         Depth       16
>         Modes       "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection

> # The 16-color VGA server

> Section "Screen"
>     Driver      "vga16"
>     Device      "Generic VGA"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Modes       "640x480" "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection

> # The Mono server

> Section "Screen"
>     Driver      "vga2"
>     Device      "Generic VGA"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Modes       "640x480" "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection

> # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
> # I128, and S3V)
> Section "Screen"
>     Driver      "accel"
>     Device      "My Video Card"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Depth       8
>         Modes       "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
>     Subsection "Display"
>         Depth       16
>         Modes       "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection