🚀 go-pugleaf

Ahhhhhhh si te interesa te puedo mandar por email mi xf86setup
Yo tengo una Sis 6326 AGP con 8 megas y la corro super bien a 800x600 o
1024x768 a 24 bits (true color), mi monitor es un AOC 4vn pero uso la
opcion Generic Multisync.

Te interesa?

Saludos 
Duncan


Sebastian Fernando Rodriguez Bustamante (sebrodri@anakena.dcc.uchile.cl) wrote:

> Hola.

> Tengo un problema instalando Linux RedHat 5.1 con mi tarjeta de
> video PCI Sis 6326 de 8 MB RAM.
> EL problema es que al correr X-Windows el monitor se ve todo con
> rayas.
> Si alguien pudiera ayudarme o tuviera una experiencia exitosa
> con similar equipo (o intuya cual es el problema :) ) se lo 
> agradeceria mucho.
> Adjunto va el archivo XF86Config.


> ============================== XF86Config ========================== 

> # File generated by XConfigurator.

> # **********************************************************************
> # Refer to the XF86Config(4/5) man page for details about the format of 
> # this file.
> # **********************************************************************

> # **********************************************************************
> # Files section.  This allows default font and rgb paths to be set
> # **********************************************************************

> Section "Files"

> # The location of the RGB database.  Note, this is the name of the
> # file minus the extension (like ".txt" or ".db").  There is normally
> # no need to change the default.

>     RgbPath	"/usr/X11R6/lib/X11/rgb"

> # Multiple FontPath entries are allowed (they are concatenated together)

>     FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
>     FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"

> EndSection

> # **********************************************************************
> # Server flags section.
> # **********************************************************************

> Section "ServerFlags"

>     # Uncomment this to cause a core dump at the spot where a signal is 
>     # received.  This may leave the console in an unusable state, but may
>     # provide a better stack trace in the core dump to aid in debugging
>     #NoTrapSignals

>     # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
>     # This allows clients to receive this key event.
>     #DontZap

>     # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
>     # sequences.  This allows clients to receive these key events.
>     #DontZoom

> EndSection

> # **********************************************************************
> # Input devices
> # **********************************************************************

> # **********************************************************************
> # Keyboard section
> # **********************************************************************

> Section "Keyboard"

>     Protocol    "Standard"

>     # when using XQUEUE, comment out the above line, and uncomment the
>     # following line
>     #Protocol   "Xqueue"

>     AutoRepeat  500 5

>     # Let the server do the NumLock processing.  This should only be 
>     # required when using pre-R6 clients
>     #ServerNumLock

>     # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>     #Xleds      1 2 3

>     #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
>     #RightCtl key to Compose, and ScrollLock key to ModeLock:

>     LeftAlt        Meta
>     RightAlt        Meta
>    ScrollLock      Compose
>    RightCtl        Control

> # To disable the XKEYBOARD extension, uncomment XkbDisable.

> #    XkbDisable

> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults).  For example, for a non-U.S.
> # keyboard, you will probably want to use:
> #    XkbModel    "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> #    XkbModel    "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> #    XkbLayout   "de"
> # or:
> #    XkbLayout   "de"
> #    XkbVariant  "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> #    XkbOptions  "ctrl:swapcaps"

> # These are the default XKB settings for XFree86
> #    XkbRules    "xfree86"
> #    XkbModel    "pc101"
> #    XkbLayout   "us"
> #    XkbVariant  ""
> #    XkbOptions  ""

>    XkbKeycodes     "xfree86"
>    XkbTypes        "default"
>    XkbCompat       "default"
>    XkbSymbols      "us(pc101)"
>    XkbGeometry     "pc"
>    XkbRules        "xfree86"
>    XkbModel        "pc101"
>     XkbLayout       "es"
> EndSection

> # **********************************************************************
> # Pointer section
> # **********************************************************************

> Section "Pointer"
>     Protocol    "Mousesystems"
>     Device      "/dev/ttyS0"

> # When using XQUEUE, comment out the above two lines, and uncomment
> # the following line.

> #    Protocol	"Xqueue"

> # Baudrate and SampleRate are only for some Logitech mice

> #    BaudRate	9600
> #    SampleRate	150

> # Emulate3Buttons is an option for 2-button Microsoft mice
> # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

> #    Emulate3Buttons
> #    Emulate3Timeout    50

> # ChordMiddle is an option for some 3-button Logitech mice

> #    ChordMiddle

> EndSection


> # **********************************************************************
> # Monitor section
> # **********************************************************************

> # Any number of monitor sections may be present

> Section "Monitor"

>     Identifier  "My Monitor"
>     VendorName  "Unknown"
>     ModelName   "Unknown"

> # HorizSync is in kHz unless units are specified.
> # HorizSync may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.

>     HorizSync   28 - 55

> # VertRefresh is in Hz unless units are specified.
> # VertRefresh may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.

>     VertRefresh 50-120

> # Modes can be specified in two formats.  A compact one-line format, or
> # a multi-line format.


> # These two are equivalent

> #    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

> #    Mode "1024x768i"
> #        DotClock	45
> #        HTimings	1024 1048 1208 1264
> #        VTimings	768 776 784 817
> #        Flags		"Interlace"
> #    EndMode

> # This is a set of standard mode timings. Modes that are out of monitor spec
> # are automatically deleted by the server (provided the HorizSync and
> # VertRefresh lines are correct), so there's no immediate need to
> # delete mode timings (unless particular mode timings don't work on your
> # monitor). With these modes, the best standard mode that your monitor
> # and video card can support for a given resolution is automatically
> # used.

> # 640x400 @ 70 Hz, 31.5 kHz hsync
> Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
> # 640x480 @ 60 Hz, 31.5 kHz hsync
> Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
> # 800x600 @ 56 Hz, 35.15 kHz hsync
> ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
> # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
> #Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace

> # 640x480 @ 72 Hz, 36.5 kHz hsync
> Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
> # 800x600 @ 60 Hz, 37.8 kHz hsync
> Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync

> # 800x600 @ 72 Hz, 48.0 kHz hsync
> Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
> # 1024x768 @ 60 Hz, 48.4 kHz hsync
> Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync

> # 1024x768 @ 70 Hz, 56.5 kHz hsync
> Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
> # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
> #Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace

> # 1024x768 @ 76 Hz, 62.5 kHz hsync
> Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
> # 1280x1024 @ 61 Hz, 64.2 kHz hsync
> Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054

> # 1280x1024 @ 74 Hz, 78.85 kHz hsync
> Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064

> # 1280x1024 @ 76 Hz, 81.13 kHz hsync
> Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064

> # Low-res Doublescan modes
> # If your chipset does not support doublescan, you get a 'squashed'
> # resolution like 320x400.

> # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
> Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
> # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
> Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
> # 320x240 @ 72 Hz, 36.5 kHz hsync
> Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
> # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
> ModeLine "400x300"     18     400  416  448  512   300  301  602  312 Doublescan
> # 400x300 @ 60 Hz, 37.8 kHz hsync
> Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
> # 400x300 @ 72 Hz, 48.0 kHz hsync
> Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
> # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
> ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
> # 480x300 @ 60 Hz, 37.8 kHz hsync
> Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
> # 480x300 @ 63 Hz, 39.6 kHz hsync
> Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
> # 480x300 @ 72 Hz, 48.0 kHz hsync
> Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan

> EndSection


> # **********************************************************************
> # Graphics device section
> # **********************************************************************

> # Any number of graphics device sections may be present

> Section "Device"
>     Identifier        "Generic VGA"
>     VendorName        "Unknown"
>     BoardName "Unknown"
>     Chipset   "generic"

> #    VideoRam 256

> #    Clocks   25.2 28.3

> EndSection

> # Device configured by Xconfigurator:

> Section "Device"
>     Identifier  "My Video Card"
>     VendorName  "Unknown"
>     BoardName   "Unknown"
>     VideoRam    8192
>     # Insert Clocks lines here if appropriate
> EndSection


> # **********************************************************************
> # Screen sections
> # **********************************************************************

> # The Colour SVGA server

> Section "Screen"
>     Driver      "svga"
>     # Use Device "Generic VGA" for Standard VGA 320x200x256
>     #Device      "Generic VGA"
>     Device      "My Video Card"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Depth       8
>         # Omit the Modes line for the "Generic VGA" device
>         Modes       "800x600"
>         ViewPort    0 0
>         # Use Virtual 320 200 for Generic VGA
>         Virtual     800 600
>     EndSubsection
>     Subsection "Display"
>         Depth       16
>         Modes       "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection

> # The 16-color VGA server

> Section "Screen"
>     Driver      "vga16"
>     Device      "Generic VGA"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Modes       "640x480" "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection

> # The Mono server

> Section "Screen"
>     Driver      "vga2"
>     Device      "Generic VGA"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Modes       "640x480" "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection

> # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
> # I128, and S3V)
> Section "Screen"
>     Driver      "accel"
>     Device      "My Video Card"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Depth       8
>         Modes       "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
>     Subsection "Display"
>         Depth       16
>         Modes       "800x600"
>         ViewPort    0 0
>         Virtual     800 600
>     EndSubsection
> EndSection