🚀 go-pugleaf

It's possible that that's the best your phone line can do.  However, here's
something that might  help.  I am also using an LT WinModem and was ALWAYS
connecting at 24,600.  Adding the modem settting S38=0 to suppress K56 Flex
and force the modem to start negotiating at V90 is now consistently giving
me connect speeds of 37,333 or better.   (I also have an impaired phone line
and don't expect a lot better than this.)

The lastest firmware revision is 5.29 available at
http://www.multiwave.com/support/download.htm  That also helped for me.

(Also, I have found that using the -V90 parameter to force higher speeds
often results in a faster reliable connection than the modem negotiates.   I
believer that even with version 5.29, there is still room for serious
improvment in the firmware for this modem.)

Whether this helps you will depend on your particular phone line and
situation.  I'd be interested to know if it does.


Good luck
Greg

Julio Alano wrote in message ...
>Is anyone else suffering from this or is it just me?
>Any comments are welcome.
>I am in Washington State area. I connecting using an internal 56k pci
modem.
>It will only connect at 26.4k (reported by DUN) althought the download
>speeds suggest I am getting closer to or just over 28.8k.
>I have tried  3 different ISPs and a number of locations/lines. My modem
>supports both K56Flex and V.90 and I have tried ISPs offering all three
main
>protocols.
>Does anyone have experience of this or any suggestions of fixes.
>
>Cheers, Julio
>
>
>