🚀 go-pugleaf

> What about IP addresses. can I just use any IP address in the 192.0.0.0
> range? does it matter if someone else in the world has this IP address?
say
> if i connect my computers together using IP addresses of 192.0.0.1 and
> 192.0.0.2, would there be any conflicts with any other computers areound
the
> world? do i have to register these IP addresses somewhere, even if I am
just
> to use them for home networking use, not to be used as a global server.
> anyway, where do i register IP addresses, and how do I assign domain names
> to them?
You can use any IP in the 192.168.x.x range or 10.x.x.x range. These are
reserved for networks that aren't directly connected to the internet, only
through Proxy servers. That way, you wouldn't have to register anything.

    --Shawn Craver

"Craig Hennessey" <craig@craighennessey.co.uk> writes:

> I have two computers, one is now unning definite linux, and the other
> windows 98. I would like to connect these computers together in a network,
> and recently bought two cards and a crossover cable.

Yes, you just need 2 cards and a crossover. Any more boxes though and
you'll need a hub and normal cable.
 
> what i need to know, is exactly what to do in both windows 98 and in linux,
> to make them work. im using KDE, or Gnome, depends on my mood, but I can do
> it in either if you want.

It's got nothing to do with either Gnome or KDE. Networking
established at boot time before even your X session is started. 

Start off by taking a trip to linuxdoc.org and reading up all the
relevant info there. You'll find most of it covered here:
http://www.linuxdoc.org/HOWTO/HOWTO-INDEX/networking.html 

It's not difficult but there's a bit to read. It's best that you have
a stab at it yourself and then come back with any problems.

You need to configure basic networking first and then think about
Samba to get windows talking to your linux box.
 
> What about IP addresses. can I just use any IP address in the 192.0.0.0
> range? does it matter if someone else in the world has this IP address? say
> if i connect my computers together using IP addresses of 192.0.0.1 and
> 192.0.0.2, would there be any conflicts with any other computers areound the
> world? 

No they are set aside for private use and the aren't seen by the rest
of the world. The only IP number seen by everyone else will be the one
given to you by your ISP. If you connect to the worlf with your linux
box you'll use something called "IP Masquerading" which will make all
your computers look like they belong to the one IP number.

> as you can see, im not network fluent at all, and im hardly linux fluent
> either, but im willing to give anything a try, including re-installing, if
> it comes to that 

I don't see why you'd need to reinstall (or even reboot) anything on
the linux machine. Networking in linux is easy once you get the hang
of the basic concepts. Networking in windows isn't particularly
difficult either although you need to reboot between config changes so
it's quite slow going.

> (windows stays though, as linux wont work on that box, ive
> tried, it wount detect the sis card ive got installed, a bastard if its your
> graphics card!).

Try again. SiS cards should now have full support on X. I'm not sure
how up to date your distribution is but you may want to try a
newer one with the latest versions of X and/or check for patches for
your graphics chipset. AFAIK though it really shouldn't be a problem.

-- 
         Richard Watson |  Pentagon Web Design Ltd  | Reading, UK 
   rwatson@pwdltd.co.uk |  Fax: +44(0)870 706 5282  | ICQ: 65274884
http://www.pwdltd.co.uk |  Reg. Linux User #183315  | GPG/PGP 0xA6AB8345