🚀 go-pugleaf

Re: Problem with CreateProc & LoadSeg
By: Peter da Silva on Sun, 06 May 1990 16:00

Re: Custom AmigaDOS DEVS.
By: Paul-Andre Panon on Fri, 04 May 1990 18:27

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Jack Radigan on Sun, 06 May 1990 12:46

Re: Problem with CreateProc & LoadSeg
By: Bruce Dawson on Sat, 05 May 1990 04:15

Help: Disable Xetec SCSI controller/HD on A500
By: khuynh on Sun, 30 Aug 1992 06:27

Re: determining screen size
By: Eddy Carroll on Sat, 05 May 1990 17:02

Re: A3000 & Unix
By: John 'Vlad' Adams on Sun, 06 May 1990 06:13

Bug in Lattice 5.02?
By: Kevin Goroway on Sun, 06 May 1990 04:25

Re: Flopy disk error handling
By: dougp on Sun, 06 May 1990 06:38

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Jim Burwell on Sun, 06 May 1990 05:24

Re: GNU stuff
By: Miles Bader on Sat, 05 May 1990 23:37

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Larry Phillips on Fri, 04 May 1990 13:44

Re: Problem with CreateProc & LoadSeg
By: Christian Motz on Sat, 05 May 1990 08:23

Re: Custon AmigaDOS DEVS.
By: SuedeHead on Sat, 05 May 1990 20:49

Re: A3000 & Unix
By: Chris Dailey on Sat, 05 May 1990 20:00

Re: GNU stuff
By: Scott Fritchie; ACC St. Olaf Col... on Sat, 05 May 1990 05:21

Re: 2.0 Specs
By: Brian J Syme IE88 on Sat, 05 May 1990 15:42

Re: a few notes about SKsh 1.4
By: Kim E. DeVaughn on Sat, 05 May 1990 17:45

Re: disk "keys"
By: Dave Lowrey on Sat, 05 May 1990 13:55

disk "keys"
By: Dave Lowrey on Fri, 04 May 1990 18:11

Re: A3000 & Unix
By: Bill Seymour on Tue, 01 May 1990 16:30

Re: A-3000 & Partitions, cont'd
By: Chuck McManis on Sat, 05 May 1990 00:23

Lattice C question
By: David Ewing on Fri, 04 May 1990 23:37

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: BAXTER_A on Sat, 05 May 1990 14:03

RE: DCTV help needed: HEEEELLLLLPPP!!
By: taylorm on Tue, 15 Sep 1992 14:58

Arexx/dme
By: Bryan Dennis O'Connor on Sat, 05 May 1990 01:01

DCTV help needed: HEEEELLLLLPPP!!
By: Ralph Seguin on Mon, 14 Sep 1992 22:40

Re: 2.0 Specs
By: Valentin Pepelea on Fri, 04 May 1990 21:52

Re: PIPE: and AmigaDOS bug (was Re: SKsh 1.4 comments)
By: Steve Koren on Fri, 04 May 1990 13:57

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Jack Radigan on Fri, 04 May 1990 23:49

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Jack Radigan on Sat, 05 May 1990 00:29

Re: JR-Comm 1.0
By: Jack Radigan on Fri, 04 May 1990 23:43

Re: Custon AmigaDOS DEVS.
By: Ewout Walraven - CATS on Fri, 04 May 1990 17:54

tape device drivers
By: REYNOLDS,WALTER GERALD JR on Fri, 04 May 1990 19:06

Bug in MANX 5.0?
By: Stefan Becker on Fri, 04 May 1990 15:42

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: Richard Frost on Fri, 04 May 1990 17:55

Re: A3000 & Unix
By: Dave Haynie on Fri, 04 May 1990 13:36

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: Marco Papa on Fri, 04 May 1990 17:27

A1000 and AmigaDos 2.0
By: James R. Norton on Fri, 04 May 1990 17:23

Benchmarking
By: Ralph Seguin on Fri, 04 May 1990 16:02

2.0 Specs
By: hopp on Fri, 04 May 1990 15:33

Re: GNU stuff
By: hopp Eric D. Hopp on Fri, 04 May 1990 15:20

Scrolling in windows
By: Ralph Seguin on Fri, 04 May 1990 15:37

Transformer for A3000....
By: L98CC on Fri, 04 May 1990 07:49

Re: Amiga Font Format
By: rick on Wed, 02 May 1990 14:51

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: rick on Thu, 03 May 1990 11:00

Re: Custon AmigaDOS DEVS.
By: rick on Thu, 03 May 1990 10:51

Re: Cursor in CUSTOMSCREEN
By: Jim Locker on Fri, 04 May 1990 05:04

<None>
By: BAXTER_A on Fri, 04 May 1990 19:22

Existence: A3000 Virtual Memory ??
By: Mike Henry on Thu, 03 May 1990 12:17

Overscan and Intuition
By: T.A. Mikalsen on Thu, 03 May 1990 22:21

Re: TeX - an idea to improve it
By: Matthew Hannigan on Fri, 04 May 1990 07:16

Re: A3000 & Unix
By: Mike (Real Amigas have keyboard ... on Wed, 02 May 1990 18:02

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Lars Soltau on Wed, 02 May 1990 20:04

Re: PIPE: and AmigaDOS bug (was Re: SKsh 1.4 comments)
By: Miles Bader on Thu, 03 May 1990 17:27

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Bjorn Knutsson on Thu, 03 May 1990 17:35

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: REYNOLDS,WALTER GERALD JR on Thu, 03 May 1990 19:10

Need printer driver help
By: H. Bret Young on Thu, 03 May 1990 18:49

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Hans Ridder on Thu, 03 May 1990 17:18

Re: "KickBench" questions...
By: D. Scott Baeder; x299 on Thu, 03 May 1990 17:55

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Marco Papa on Thu, 03 May 1990 17:16

Re: A-3000 & Partitions, cont'd
By: Dallas J. Hodgson on Thu, 03 May 1990 04:32

Re: ZIP chips for 2630
By: Dallas J. Hodgson on Thu, 03 May 1990 04:23

Re: a few notes about SKsh 1.4
By: M Gordon on Thu, 03 May 1990 11:52

Re: Screens flipping to non-interlace for no good reason
By: Darren New on Thu, 03 May 1990 15:53

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: Wolfram Schmidt on Thu, 03 May 1990 14:41

Introduction to comp.sys.amiga.tech
By: Edwin HOOGERBEETS on Tue, 01 May 1990 18:32

Other mouses available ?
By: Knol Marcel L on Thu, 03 May 1990 14:05

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Michael Bergman on Thu, 03 May 1990 13:18

Re: TeX - an idea to improve it
By: ONM29 on Thu, 03 May 1990 12:22

Re: PIPE: and AmigaDOS bug (was Re: SKsh 1.4 comments)
By: Jesper Peterson on Thu, 03 May 1990 07:38

Re: TeX - an idea to improve it
By: ONM29 on Mon, 30 Apr 1990 14:35

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: BAXTER_A on Thu, 03 May 1990 15:09

Re: a few notes about SKsh 1.4
By: Kim DeVaughn on Thu, 03 May 1990 06:01

Confused semi-novice beginner questions
By: Dave Schaumann on Thu, 03 May 1990 05:15

determining screen size
By: REYNOLDS,WALTER GERALD JR on Thu, 03 May 1990 05:00

Re: NTSC vs. PAL screen checking (Was Re: JRComm....)
By: Paul John Falstad on Thu, 03 May 1990 00:54

Re: Manx 5.0 state?
By: Paul John Falstad on Thu, 03 May 1990 00:58

drive step rate
By: Gabriel Dalbec on Thu, 03 May 1990 01:58

Re: JR-Comm 1.0
By: John 'Vlad' Adams on Thu, 03 May 1990 01:51

a few notes about SKsh 1.4
By: Steve Koren on Wed, 02 May 1990 15:02

Re: Screens flipping to non-interlace for no good reason
By: Larry Phillips on Tue, 01 May 1990 12:08

Re: Screens flipping to non-interlace for no good reason
By: Richard Addison on Wed, 02 May 1990 23:16

JR-Comm 1.0
By: tjhayko on Wed, 02 May 1990 23:08

"KickBench" questions...
By: Scott Blachowicz on Tue, 01 May 1990 15:03

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Marco Papa on Wed, 02 May 1990 22:37

Re: Screens flipping to non-interlace for no good reason
By: Vincent H. Lee on Wed, 02 May 1990 21:48

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Bjorn Knutsson on Wed, 02 May 1990 21:33

Re: Why no enhancer for the 500 right away.
By: Vincent H. Lee on Wed, 02 May 1990 21:35

Re: Manx 5.0 state?
By: Ken Thompson on Wed, 02 May 1990 20:20

CARDROM for 2091
By: Ralph Seguin on Wed, 02 May 1990 18:53

NTSC vs. PAL screen checking (Was Re: JRComm....)
By: Brett Kessler on Wed, 02 May 1990 17:02

Re: Screens flipping to non-interlace for no good reason
By: Paul John Falstad on Wed, 02 May 1990 15:59

Re: Screens flipping to non-interlace for no good reason
By: John Meissen on Wed, 02 May 1990 16:14

Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
By: Michael Bergman on Wed, 02 May 1990 14:41

Custon AmigaDOS DEVS.
By: CrisP of Truth and Justice on Wed, 02 May 1990 10:15

Re: Why no enhancer for the 500 right away.
By: Ben Scott on Wed, 02 May 1990 12:20

Re: Why no enhancer for the 500 right away.
By: Larry Phillips on Mon, 30 Apr 1990 22:29

Re: A-3000 & Partitions, cont'd
By: Andy Finkel on Wed, 02 May 1990 03:00

Dumb question about A3000 custom chip clock speed
By: Alex Matulich on Wed, 02 May 1990 00:29

ZIP chips for 2630
By: Ralph Seguin on Wed, 02 May 1990 03:51

GNU stuff
By: Denizen of Hell on Wed, 02 May 1990 04:17

Screens flipping to non-interlace for no good reason
By: Karl Lehenbauer on Wed, 02 May 1990 01:14

Re: A3000 agnus
By: George Robbins on Wed, 09 May 1990 09:12

Re: A3000 agnus
By: dougp on Mon, 07 May 1990 02:40

Connecting a I*M keyboard to an Amiga 500
By: mohrc on Thu, 20 Aug 1992 03:17

Re: 2088 BridgeCard
By: markv on Thu, 03 May 1990 14:13

2088 BridgeCard
By: George Armhold on Wed, 02 May 1990 23:50

Amiga 3000 trade-in
By: Alex Matulich on Wed, 02 May 1990 00:21

Accessing the modem in AmigaBASIC/Pascal
By: John Dutka on Thu, 03 May 1990 02:35

8 Bit GS to HAM (source code wanted)
By: Doug Teeter on Sun, 15 Apr 1990 01:54

GUI interfacing
By: Eric Giguere on Sun, 15 Apr 1990 00:52

Re: Handlers (AUX: users should try ComMan 1.3's CNX:serial.device!)
By: Bill Cavanaugh on Sat, 14 Apr 1990 22:00

Re: An asynchronous track-by-track disk copier...
By: Martin Taillefer on Sat, 14 Apr 1990 11:35

Re: Handlers (AUX: users should try ComMan 1.3's CNX:serial.device!)
By: Larry Phillips on Fri, 13 Apr 1990 04:28

Re: DisplayBeep()
By: Eric Sanders on Sat, 14 Apr 1990 03:38

Re: async copier -- updating the rootblock
By: Colin Plumb on Sat, 14 Apr 1990 19:19

Creating a .device
By: Tom Limoncelli on Sat, 14 Apr 1990 15:22

Re: Opening dos.library in C
By: Daniel S. Riley on Sat, 14 Apr 1990 14:56

Re: Handlers (AUX: users should try ComMan 1.3's CNX:serial.device!)
By: Daniel S. Riley on Sat, 14 Apr 1990 14:47

Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!
By: Daniel S. Riley on Sat, 14 Apr 1990 14:41

QB and SCSI tape drives
By: Daniel James on Sat, 14 Apr 1990 00:19

Re: Async AmigaDOS I/O using locks and packets?
By: Deven T. Corzine on Sat, 14 Apr 1990 08:43

Re: Making Power Windows work with Manx 5.0a
By: Deven T. Corzine on Sat, 14 Apr 1990 08:40

Re: An asynchronous track-by-track disk copier...
By: Deven T. Corzine on Sat, 14 Apr 1990 08:31

What happens to my memory?
By: Neil McCulloch on Fri, 13 Apr 1990 05:10

Re: How to do low-level console I/O?
By: Deven T. Corzine on Sat, 14 Apr 1990 07:54

Re: Amiga not capable of speeds over 9600
By: Marco Papa on Sat, 14 Apr 1990 02:44