🚀 go-pugleaf

Re: The MIPS EXECUTE instruction
By: Craig Hansen on Tue, 28 May 1991 18:46

Re: 040 vs 030 SPEC nos.
By: Bill Ledbetter on Tue, 28 May 1991 18:34

Re: The MIPS EXECUTE instruction
By: Cliff Herod on Tue, 28 May 1991 18:26

Re: Pneumatic computers (yes, air-pressure powered)
By: Scott Dorsey on Tue, 28 May 1991 18:10

Re: FFT for SPARC
By: Ed Nather on Tue, 28 May 1991 18:08

Derrick Lehmer - a real computer architect
By: David Hough on Tue, 28 May 1991 17:41

Re: Large Files (> 2 GByte) w/NFS
By: Ed Hamrick on Tue, 28 May 1991 17:58

Re: IEEE floating point
By: Wm E Davidsen Jr on Tue, 28 May 1991 16:55

Re: What's in the '586?
By: Jose Pina Coelho on Tue, 28 May 1991 16:05

The MIPS EXECUTE instruction
By: Gene H. Olson on Mon, 27 May 1991 18:43

Re: Pneumatic computers (yes, air-pressure powered)
By: Tom Gardner on Tue, 28 May 1991 08:01

Re: Large Files (> 2 GByte) w/NFS
By: Paulo Amaral on Tue, 28 May 1991 09:02

Re: IEEE floating point
By: C.E. Thompson on Mon, 27 May 1991 11:48

Re: ACE, buses, and the future of ultrix
By: John Mashey on Tue, 28 May 1991 05:09

Re: What does "cascoded" mean?
By: CHUCK PARSONS 617-253-4157 on Fri, 24 May 1991 05:58

Re: Pneumatic computers (yes, air-pressure powered)
By: Paul Ilgenfritz on Mon, 27 May 1991 23:13

Re: IEEE floating point
By: Dik T. Winter on Tue, 28 May 1991 01:48

Re: Code to Data ratio
By: Tim Bray on Tue, 28 May 1991 00:11

Re: IEEE floating point
By: Keith Bierman fpgroup on Mon, 27 May 1991 18:43

Large Files (> 2 GByte) w/NFS
By: Ed Hamrick on Mon, 27 May 1991 17:02

Re: Pneumatic computers (yes, air-pressure powered)
By: Eugene Durr on Mon, 27 May 1991 13:22

Re: IEEE floating point
By: John D. McCalpin on Mon, 27 May 1991 13:29

Re: IEEE floating point
By: Matt Kennel on Mon, 27 May 1991 06:53

Re: new instructions
By: Gideon YUVAL on Sun, 26 May 1991 20:02

LOOKING FOR iPSC/2 ARCHITECTURE
By: comp20 on Sun, 26 May 1991 23:31

VAX EDIV remainder (was new instructions)
By: Chris Torek on Sun, 26 May 1991 20:40

Re: Code to Data ratio
By: Ian Kemmish on Sun, 26 May 1991 19:10

Re: IEEE floating point
By: John D. McCalpin on Sun, 26 May 1991 14:02

Re: IEEE floating point
By: Don Wells on Sun, 26 May 1991 02:45

Re: IEEE floating point
By: Herman Rubin on Sun, 26 May 1991 00:25

Re: IEEE floating point
By: Henry Spencer on Sat, 25 May 1991 22:25

Re: IEEE floating point
By: Donald Lindsay on Sat, 25 May 1991 21:12

Re: Pneumatic computers (yes, air-pressure powered)
By: Zoltan Somogyi on Sat, 25 May 1991 21:08

Re: Pneumatic computers (yes, air-pressure powered)
By: peter da silva on Sat, 25 May 1991 14:41

Code to Data ratio
By: Henry J. Cobb on Sat, 25 May 1991 10:07

Re: new instructions
By: root on Sat, 25 May 1991 11:54

Re: Amdahl's Rule
By: Perry Scott on Fri, 24 May 1991 23:36

Re: IEEE floating point
By: Steve Correll on Fri, 24 May 1991 22:10

Re: new instructions
By: Sean Eric Fagan on Thu, 23 May 1991 22:01

Re: new instructions
By: Sean Eric Fagan on Thu, 23 May 1991 19:25

RE: VLIW references
By: Robert M. Bultman on Sat, 25 May 1991 05:27

Re: What's in the '586?
By: Chris Jones on Fri, 24 May 1991 15:31

Re: Will NeXT survive? Grow with the times?
By: Terry Ingoldsby on Fri, 24 May 1991 23:16

Re: new instructions
By: Chris Torek on Sat, 25 May 1991 03:28

IEEE floating point
By: jbs on Fri, 24 May 1991 23:06

Re: new instructions
By: peter da silva on Fri, 24 May 1991 21:15

iWARP notes... it's pretty neat
By: Richard A. Lethin on Fri, 24 May 1991 19:09

Re: what if the i860 had vector registers... ?
By: David Chase on Fri, 24 May 1991 19:39

Re: new instructions
By: Chris Torek on Fri, 24 May 1991 19:25

Re: new instructions
By: Dan Rabin on Fri, 24 May 1991 14:38

Re: Amdahl's Rule
By: Doug Rogers on Fri, 24 May 1991 13:29

Re: new instructions
By: Craig Hansen on Fri, 24 May 1991 17:53

Predominance of IEEE 754 floating-point arithmetic?
By: David G. Hough on validgh on Fri, 24 May 1991 17:42

Re: IEEE floating point
By: Henry Spencer on Fri, 24 May 1991 17:37

Re: IEEE floating point
By: Hugh LaMaster on Fri, 24 May 1991 16:18

Re: Amdahl's Law vs Amdahl/Case Rule (Was: Fast I/O)
By: Dan Prener on Fri, 24 May 1991 00:02

Re: new instructions
By: Christer Ericson on Fri, 24 May 1991 12:24

Re: VISC - A way to speed up moto cisc mpu's?
By: Sean Eric Fagan on Thu, 23 May 1991 21:00

Re: new instructions
By: Sean Eric Fagan on Thu, 23 May 1991 08:42

what if the i860 had vector registers... ?
By: Greg Lindahl on Fri, 24 May 1991 03:57

FFT for SPARC
By: Bruce Allen on Fri, 24 May 1991 07:34

Re: What's in the '586?
By: Richard A. O'Keefe on Fri, 24 May 1991 03:22

Re: new instructions
By: Clark L. Coleman on Thu, 23 May 1991 21:05

Re: ACE, buses, and the future of ultrix
By: Alex Martelli on Wed, 22 May 1991 18:25

IEEE floating point
By: jbs on Fri, 24 May 1991 00:52

Re: ieee floating standard
By: Jim Patterson on Thu, 23 May 1991 13:04

Re: new instructions
By: Bruce Walker on Thu, 23 May 1991 23:19

Re: parity is for farmers?
By: Bob Jewett on Thu, 23 May 1991 20:29

Re: bobstone measurements
By: Checkpoint Technologies on Thu, 23 May 1991 18:53

Re: new instructions
By: Jim battle on Thu, 23 May 1991 20:46

Teraplex MISC: what does(did) it look like?
By: Mauricio Breternitz on Thu, 23 May 1991 19:05

Re: Amdahl's Rule
By: Donald Lindsay on Thu, 23 May 1991 20:16

What does "cascoded" mean?
By: RAMontante on Thu, 23 May 1991 19:50

OOOPS, forget the vector bobstone
By: Marv Graham on Thu, 23 May 1991 19:10

Re: CISC MIPS/MHz Again
By: Paul K. Rodman on Thu, 23 May 1991 17:52

Re: bobstone measurements
By: Kirby L. Collins on Thu, 23 May 1991 17:51

Re: new instructions
By: Jim Giles on Thu, 23 May 1991 16:11

Re: small benchmark
By: David Hinds on Thu, 23 May 1991 16:18

Re: What's in the '586?
By: Freedman on Thu, 23 May 1991 15:34

Re: Amdahl's Rule
By: Doug Rogers on Thu, 23 May 1991 09:31

Re: bobstone measurements
By: Marv Graham on Thu, 23 May 1991 13:42

Re: new instructions
By: Jim Giles on Thu, 23 May 1991 13:05

Re: VISC - A way to speed up moto cisc mpu's?
By: peter da silva on Thu, 23 May 1991 12:43

Re: What's in the '586?
By: peter da silva on Thu, 23 May 1991 12:44

Re: new instructions
By: peter da silva on Thu, 23 May 1991 12:38

Re: Integer/floating
By: amos shapir on Thu, 23 May 1991 13:19

bobstone measurements
By: Marv Graham on Thu, 23 May 1991 11:47

Re: What's in the '586?
By: Ian Moor on Thu, 23 May 1991 10:40

Re: VISC - A way to speed up moto cisc mpu's?
By: gdtltr (The Befuddled One) on Thu, 23 May 1991 04:48

Re: What's in the '586?
By: Renu Raman on Thu, 23 May 1991 04:59

Re: What's in the '586?
By: David Feustel on Thu, 23 May 1991 02:28

Re: VISC - A way to speed up moto cisc mpu's?
By: Plinio Barbeito on Thu, 23 May 1991 03:15

Re: What's in the '586?
By: Mark Robert Thorson on Wed, 22 May 1991 03:49

Re: ieee floating standard
By: Henry Spencer on Wed, 22 May 1991 23:51

Re: ieee floating standard
By: Hugh LaMaster on Wed, 22 May 1991 22:18

Re: Small Benchmark
By: Allan Gottlieb on Wed, 22 May 1991 21:41

Re: new instructions
By: Robert Firth on Wed, 22 May 1991 21:41

Re: new instructions
By: Jim Giles on Wed, 22 May 1991 21:11

EE Times article "Intel's CPU wars: the 32-bit struggle for succession"
By: Michael Hui on Wed, 22 May 1991 21:16

Re: new instructions
By: Jim Giles on Wed, 22 May 1991 16:38

Re: ieee floating standard
By: Henry Spencer on Wed, 22 May 1991 16:29

Re: VISC - A way to speed up moto cisc mpu's?
By: Chris Torek on Wed, 22 May 1991 16:03

Re: Amdahl's Rule
By: Jerry Gitomer on Tue, 21 May 1991 13:32

FPCA 91 Advance Program
By: Robert Muller on Wed, 22 May 1991 12:03

Re: What's in the '586?
By: Richard L. Cook on Wed, 22 May 1991 15:10

Newbie type questions
By: Jeff Leyser on Wed, 22 May 1991 12:36

Re: What's in the '586?
By: Jeff Leyser on Wed, 22 May 1991 12:28

Re: Amdahl's Law vs Amdahl/Case Rule (Was: Fast I/O)
By: Craig Burley on Wed, 22 May 1991 08:03

Re: Fast I/O
By: Colin Plumb on Tue, 21 May 1991 18:45

Amdahl's Law vs Amdahl/Case Rule (Was: Fast I/O)
By: Alex Martelli on Tue, 21 May 1991 09:24

Re: What's in the '586?
By: Floyd Davidson on Wed, 22 May 1991 01:46

Re: Interrupt handler for the i860
By: jim morris on Wed, 22 May 1991 01:15

ieee floating standard
By: jbs on Wed, 22 May 1991 00:20

Re: new instructions
By: Robert Herndon on Wed, 22 May 1991 00:16

More Small Benchmark Results
By: Kirk 'UhOh' Johnson on Tue, 21 May 1991 21:49

Re: Interrupt handler for the i860
By: Robert Ellefson on Tue, 21 May 1991 21:23

Re: Small Benchmark
By: Clark L. Coleman on Tue, 21 May 1991 20:01

Re: Fast I/O
By: Hugh LaMaster on Tue, 21 May 1991 20:33

Re: new instructions
By: Clark L. Coleman on Tue, 21 May 1991 19:10

Re: What's in the '586?
By: Joseph Allen on Tue, 21 May 1991 19:12

Re: Small Benchmark
By: David Hinds on Tue, 21 May 1991 16:09

Re: Fast I/O
By: Marc Auslander on Tue, 21 May 1991 13:12

Re: Frequency of elementary functions (and other things)
By: Jim Giles on Tue, 21 May 1991 14:54

040 vs 030 SPEC nos.
By: abaum Allen Baum on Tue, 21 May 1991 09:49

Re: Interrupt handler for the i860
By: Dik T. Winter on Tue, 21 May 1991 08:17

Re: Anything wrong with the i860
By: Marc Brandis on Tue, 21 May 1991 07:22

Re: CISC MIPS/MHz Again
By: SAKURAI atsushi on Tue, 21 May 1991 07:50

Re: CISC MIPS/MHz Again
By: SAKURAI atsushi on Tue, 21 May 1991 07:19